Wood engraving template for a heart plaque SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A double heart outline with a sprig of leaves that climbs the inside of its left edge from a six-petalled flower at the point. The right side is left clear for two names or a date.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.56 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 13: 1 outer edge and 12 cut-outs |
| Cut length | 1,488 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 215 curve and line segments |
Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.46 mm | 378 mm | 110 | Too fine for most machines |
| 2 × 1.81 in (51 × 46 mm) | 0.91 mm | 756 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.71 in (76 × 69 mm) | 1.4 mm | 1,134 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.62 in (102 × 92 mm) | 1.8 mm | 1,512 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.42 in (152 × 138 mm) | 2.7 mm | 2,268 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.23 in (203 × 184 mm) | 3.7 mm | 3,024 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.85 in (305 × 276 mm) | 5.5 mm | 4,535 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template as a stencil plate Solid · one piece -
Wood engraving template as a border stencil Solid · one piece -
Wood engraving template for a cutting board Outline · 6 pieces -
Wood engraving template for a round coaster Solid · one piece -
Wood engraving template for a square coaster Solid · one piece -
Wood engraving template for a plaque Solid · one piece -
Wood engraving template for an oval plaque Solid · one piece -
Wood engraving template for a box lid Solid · one piece
← Wood engraving template for a family sign All 15 wood engraving templates Wood engraving template as a stencil plate →