Wood engraving template as a border stencil SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A strip 100 by 26 mm with six pairs of leaves and a dot before each pair cut out of it. Trace it, slide it along by its own six repeats, and trace again for a border of any length.
What is in the file
| Size | 100 × 26 mm (3.94 × 1.02 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 631 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 134 curve and line segments |
| Also found as | Engraving templates stencils SVG |
Measured from the file. PNG: 2,000 × 577 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.26 in (25 × 7 mm) | 0.64 mm | 160 mm | 260 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.52 in (51 × 13 mm) | 1.3 mm | 321 mm | 80 | Vinyl, card and thin sheet |
| 3 × 0.78 in (76 × 20 mm) | 1.9 mm | 481 mm | 36 | Vinyl, card and thin sheet |
| 4 × 1.04 in (102 × 26 mm) | 2.5 mm | 641 mm | 18 | Vinyl, card and thin sheet |
| 6 × 1.56 in (152 × 40 mm) | 3.8 mm | 962 mm | 6 | Any material, including 3 mm wood and acrylic |
| 8 × 2.08 in (203 × 53 mm) | 5.1 mm | 1,282 mm | 5 | Any material, including 3 mm wood and acrylic |
| 12 × 3.12 in (305 × 79 mm) | 7.6 mm | 1,923 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template for a cutting board Outline · 6 pieces -
Wood engraving template for a round coaster Solid · one piece -
Wood engraving template for a square coaster Solid · one piece -
Wood engraving template for a plaque Solid · one piece -
Wood engraving template for an oval plaque Solid · one piece -
Wood engraving template for a box lid Solid · one piece -
Wood engraving template for a bookmark Solid · one piece -
Wood engraving template for key tags Outline · 12 pieces
← Wood engraving template as a stencil plate All 15 wood engraving templates Wood engraving template for a cutting board →