Wood engraving template for a plaque SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A plaque 100 by 60 mm with scooped corners: a bold edge, a fine inner line and a sprig of leaves at each end pointing towards the middle. Set a name between the sprigs.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.36 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 1,401 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 222 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,231 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.43 mm | 356 mm | 150 | Too fine for most machines |
| 2 × 1.2 in (51 × 30 mm) | 0.86 mm | 712 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.8 in (76 × 46 mm) | 1.3 mm | 1,068 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.4 in (102 × 61 mm) | 1.7 mm | 1,423 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.6 in (152 × 91 mm) | 2.6 mm | 2,135 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.8 in (203 × 122 mm) | 3.5 mm | 2,847 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.2 in (305 × 183 mm) | 5.2 mm | 4,270 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template for an oval plaque Solid · one piece -
Wood engraving template for a box lid Solid · one piece -
Wood engraving template for a bookmark Solid · one piece -
Wood engraving template for key tags Outline · 12 pieces -
Wood engraving template for a wood slice Solid · one piece -
Wood engraving template for a tree ornament Solid · one piece -
Wood engraving template with an anchor Solid · one piece -
Wood engraving template for a family sign Solid · one piece
← Wood engraving template for a square coaster All 15 wood engraving templates Wood engraving template for an oval plaque →