Wood engraving template with an anchor SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An anchor inside a ring of rope: the ring at the top of its shank and the tips of both flukes run into the rope. For a beach house sign, a boat name board or a coaster.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 31: 1 outer edge and 30 cut-outs |
| Cut length | 1,444 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 347 curve and line segments |
| Also found as | Wood engraving templates anchors SVG |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.46 mm | 367 mm | 100 | Too fine for most machines |
| 2 × 2 in (51 × 51 mm) | 0.91 mm | 734 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 3 in (76 × 76 mm) | 1.4 mm | 1,100 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 1.8 mm | 1,467 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 2.7 mm | 2,201 mm | 1 | Vinyl, card and thin sheet |
| 8 × 8 in (203 × 203 mm) | 3.7 mm | 2,934 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 5.5 mm | 4,401 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template for a family sign Solid · one piece -
Wood engraving template for a heart plaque Solid · one piece -
Wood engraving template as a stencil plate Solid · one piece -
Wood engraving template as a border stencil Solid · one piece -
Wood engraving template for a cutting board Outline · 6 pieces -
Wood engraving template for a round coaster Solid · one piece -
Wood engraving template for a square coaster Solid · one piece -
Wood engraving template for a plaque Solid · one piece
← Wood engraving template for a tree ornament All 15 wood engraving templates Wood engraving template for a family sign →