Wood engraving template for a round coaster SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Twenty leaves that all run the same way round, between a rim and an inner ring. The clear circle in the middle is about 72 mm across at 100 mm, for a monogram, a date or a small picture.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 22: 1 outer edge and 21 cut-outs |
| Cut length | 1,355 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 160 curve and line segments |
| Symmetry | 20-fold rotation |
| Also found as | Laser engraver templates SVG |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.66 mm | 344 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.3 mm | 688 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 2 mm | 1,033 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 2.6 mm | 1,377 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 4 mm | 2,065 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 5.3 mm | 2,753 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 7.9 mm | 4,130 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More wood engraving template SVG files
-
Wood engraving template for a square coaster Solid · one piece -
Wood engraving template for a plaque Solid · one piece -
Wood engraving template for an oval plaque Solid · one piece -
Wood engraving template for a box lid Solid · one piece -
Wood engraving template for a bookmark Solid · one piece -
Wood engraving template for key tags Outline · 12 pieces -
Wood engraving template for a wood slice Solid · one piece -
Wood engraving template for a tree ornament Solid · one piece
← Wood engraving template for a cutting board All 15 wood engraving templates Wood engraving template for a square coaster →