Free witch SVG

Witch cat in a pointed hat SVG

Witch cat in a pointed hat, as a solid black shape
Witch cat in a pointed hat. The preview is the SVG file itself.

A cat sitting upright and facing you in a bent witch hat, with slanted eyes, a small nose and a tail that curls round to one side. For treat bags, bunting and children’s shirts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size66 × 100 mm (2.58 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length547 mm at this size
Narrowest part2.5 mm at this size
Nodes145 curve and line segments

Measured from the file. PNG: 1,337 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.64 mm139 mm140Fine detail: vinyl and paper only, weed with care
1.31 × 2 in (33 × 51 mm)1.3 mm278 mm40Vinyl, card and thin sheet
1.97 × 3 in (50 × 76 mm)1.9 mm417 mm15Vinyl, card and thin sheet
2.62 × 4 in (67 × 102 mm)2.5 mm556 mm8Vinyl, card and thin sheet
3.93 × 6 in (100 × 152 mm)3.8 mm834 mm2Any material, including 3 mm wood and acrylic
5.24 × 8 in (133 × 203 mm)5.1 mm1,112 mm2Any material, including 3 mm wood and acrylic
7.86 × 12 in (200 × 305 mm)7.6 mm1,667 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch SVG files

← Witch broomstick with a bow All 15 witches Three dancing witches →