Free witch SVG

Witch outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Witch outline, drawn as a line
Witch outline. The preview is the SVG file itself.

The witch face drawn as a line: the hat with its band and buckle, the hair, the round face, eyes that peep from under the brim, a long nose and a wide grin, all joined into one piece. For colouring pages, foil quill and pen plotters.

What is in the file

Size96 × 100 mm (3.78 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length1,545 mm at this size
Narrowest part2.2 mm at this size
Nodes218 curve and line segments

Measured from the file. PNG: 1,925 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.56 mm392 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.1 mm785 mm25Vinyl, card and thin sheet
2.88 × 3 in (73 × 76 mm)1.7 mm1,177 mm9Vinyl, card and thin sheet
3.84 × 4 in (98 × 102 mm)2.2 mm1,570 mm6Vinyl, card and thin sheet
5.77 × 6 in (146 × 152 mm)3.4 mm2,355 mm2Any material, including 3 mm wood and acrylic
7.69 × 8 in (195 × 203 mm)4.5 mm3,139 mm1Any material, including 3 mm wood and acrylic
11.53 × 12 in (293 × 305 mm)6.7 mm4,709 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch SVG files

← Witch name sign All 15 witches Layered witch face in four colours →