Free witch SVG

Witch name sign SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Witch name sign, as a solid black shape
Witch name sign. The preview is the SVG file itself.

The flying witch above a wide blank panel, joined to it by her shoe and the bristles of the broom. Add a name, a house number or a greeting of your own to the panel.

What is in the file

Size100 × 96 mm (3.94 × 3.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length678 mm at this size
Narrowest part1.8 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 1,923 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.46 mm172 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.91 mm344 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.88 in (76 × 73 mm)1.4 mm517 mm9Vinyl, card and thin sheet
4 × 3.84 in (102 × 98 mm)1.8 mm689 mm6Vinyl, card and thin sheet
6 × 5.76 in (152 × 146 mm)2.7 mm1,033 mm2Vinyl, card and thin sheet
8 × 7.68 in (203 × 195 mm)3.7 mm1,378 mm1Any material, including 3 mm wood and acrylic
12 × 11.52 in (305 × 293 mm)5.5 mm2,067 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch SVG files

← Witches brew potion bottle All 15 witches Witch outline →