Free witch SVG

Witch face with a buckled hat SVG

Witch face with a buckled hat, as a solid black shape
Witch face with a buckled hat. The preview is the SVG file itself.

A friendly witch from the front: a bent hat with a band and buckle, hair hanging down both sides, two eyes, a nose and a wide smile. Slim seams part the hat and hair from the face.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size96 × 100 mm (3.78 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length843 mm at this size
Narrowest part2.8 mm at this size
Nodes142 curve and line segments

Measured from the file. PNG: 1,925 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.71 mm214 mm100Fine detail: vinyl and paper only, weed with care
1.92 × 2 in (49 × 51 mm)1.4 mm428 mm25Vinyl, card and thin sheet
2.88 × 3 in (73 × 76 mm)2.1 mm642 mm9Vinyl, card and thin sheet
3.84 × 4 in (98 × 102 mm)2.8 mm856 mm6Vinyl, card and thin sheet
5.77 × 6 in (146 × 152 mm)4.3 mm1,285 mm2Any material, including 3 mm wood and acrylic
7.69 × 8 in (195 × 203 mm)5.7 mm1,713 mm1Any material, including 3 mm wood and acrylic
11.53 × 12 in (293 × 305 mm)8.5 mm2,569 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch SVG files

← Standing witch silhouette with a besom All 15 witches Witchy woman in a wide hat →