Free witch SVG

Witch broomstick with a bow SVG

Witch broomstick with a bow, as a solid black shape
Witch broomstick with a bow. The preview is the SVG file itself.

A besom on a slant with a crooked handle, a bound collar, slits cut between the twigs and a ribbon tied in a bow where the twigs begin. For door signs and the corner of a card.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size87 × 100 mm (3.43 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length478 mm at this size
Narrowest part3.6 mm at this size
Nodes92 curve and line segments

Measured from the file. PNG: 1,750 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.91 mm121 mm110Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)1.8 mm243 mm30Vinyl, card and thin sheet
2.61 × 3 in (66 × 76 mm)2.7 mm364 mm12Vinyl, card and thin sheet
3.48 × 4 in (88 × 102 mm)3.7 mm486 mm6Any material, including 3 mm wood and acrylic
5.22 × 6 in (133 × 152 mm)5.5 mm728 mm2Any material, including 3 mm wood and acrylic
6.96 × 8 in (177 × 203 mm)7.3 mm971 mm1Any material, including 3 mm wood and acrylic
10.44 × 12 in (265 × 305 mm)11 mm1,457 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More witch SVG files

← Witch shoe with a buckle All 15 witches Witch cat in a pointed hat →