Layered witch face in four colours SVG
Four colours to stack: a purple base with the shoulders of a cloak, orange hair and buckle, a green face, and a black hat with the eyes, nose and smile. Cut each from its own sheet and build the witch from the back.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 81 × 100 mm (3.18 × 3.94 in), scales to any size |
|---|---|
| Pieces | 11 separate pieces |
| Outlines to cut | 12: 11 outer edges and 1 cut-out |
| Cut length | 1,367 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 211 curve and line segments |
| Layers | 6: cloak, hair, face, hat, band and buckle |
Measured from the file. PNG: 1,631 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.81 × 1 in (21 × 25 mm) | Over 1.5 mm | 347 mm | 120 | Vinyl, card and thin sheet |
| 1.62 × 2 in (41 × 51 mm) | Over 3 mm | 694 mm | 30 | Any material, including 3 mm wood and acrylic |
| 2.42 × 3 in (62 × 76 mm) | Over 4.6 mm | 1,042 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.23 × 4 in (82 × 102 mm) | Over 6.1 mm | 1,389 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.85 × 6 in (123 × 152 mm) | Over 9.1 mm | 2,083 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.46 × 8 in (164 × 203 mm) | Over 12 mm | 2,778 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.7 × 12 in (246 × 305 mm) | Over 18 mm | 4,167 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More witch SVG files
-
Flying witch with a cat on her broom Solid · one piece -
Standing witch silhouette with a besom Solid · one piece -
Witch face with a buckled hat Solid · one piece -
Witchy woman in a wide hat Solid · one piece -
Witch hand with long nails Solid · one piece -
Witch feet in the air Solid · one piece -
Witch shoe with a buckle Solid · one piece -
Witch broomstick with a bow Solid · one piece
← Witch outline All 15 witches Flying witch with a cat on her broom →