Free Walk by Faith SVG

Walk by Faith in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Walk by Faith in Alfa Slab One, as a solid black shape
Walk by Faith in Alfa Slab One. The preview is the SVG file itself.

“Walk by Faith” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 51 mm (3.94 × 2.02 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length872 mm at this size
Narrowest part2.4 mm at this size
Nodes226 curve and line segments

Measured from the file. PNG: 2,000 × 1,065 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.61 mm221 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.03 in (51 × 26 mm)1.2 mm443 mm45Vinyl, card and thin sheet
3 × 1.54 in (76 × 39 mm)1.8 mm664 mm21Vinyl, card and thin sheet
4 × 2.06 in (102 × 52 mm)2.4 mm886 mm10Vinyl, card and thin sheet
6 × 3.08 in (152 × 78 mm)3.7 mm1,329 mm3Any material, including 3 mm wood and acrylic
8 × 4.11 in (203 × 104 mm)4.9 mm1,772 mm2Any material, including 3 mm wood and acrylic
12 × 6.17 in (305 × 157 mm)7.3 mm2,658 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith in Lilita One All 13 Walk by Faith designs Walk by Faith in Amatic SC →