Free Walk by Faith SVG

Walk by Faith stencil plate SVG

Walk by Faith stencil plate, as a solid black shape — Walk by Faith stencil plate. The preview is the SVG file itself.

A rounded plate with “WALK BY FAITH” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,356 mm at this size
Narrowest part	1.1 mm at this size
Nodes	263 curve and line segments

Measured from the file. PNG: 2,000 × 1,456 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.28 mm	344 mm	130	Too fine for most machines
2 × 1.43 in (51 × 36 mm)	0.56 mm	689 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.15 in (76 × 55 mm)	0.84 mm	1,033 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.87 in (102 × 73 mm)	1.1 mm	1,378 mm	6	Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)	1.7 mm	2,067 mm	2	Vinyl, card and thin sheet
8 × 5.74 in (203 × 146 mm)	2.2 mm	2,755 mm	2	Vinyl, card and thin sheet
12 × 8.6 in (305 × 219 mm)	3.4 mm	4,133 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith outline lettering All 12 Walk by Faith designs Walk by Faith with a drop shadow →