Free Walk by Faith SVG

Walk by Faith in Amatic SC SVG

Walk by Faith in Amatic SC, as a solid black shape — Walk by Faith in Amatic SC. The preview is the SVG file itself.

“Walk by Faith” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 94 mm (3.94 × 3.69 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	15: 11 outer edges and 4 cut-outs
Cut length	1,404 mm at this size
Narrowest part	1.4 mm at this size
Nodes	487 curve and line segments

Measured from the file. PNG: 2,000 × 1,879 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.94 in (25 × 24 mm)	0.36 mm	357 mm	100	Too fine for most machines
2 × 1.87 in (51 × 48 mm)	0.71 mm	713 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.81 in (76 × 71 mm)	1.1 mm	1,070 mm	12	Vinyl, card and thin sheet
4 × 3.75 in (102 × 95 mm)	1.4 mm	1,426 mm	6	Vinyl, card and thin sheet
6 × 5.62 in (152 × 143 mm)	2.1 mm	2,140 mm	2	Vinyl, card and thin sheet
8 × 7.5 in (203 × 190 mm)	2.8 mm	2,853 mm	1	Vinyl, card and thin sheet
12 × 11.24 in (305 × 286 mm)	4.3 mm	4,279 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith in Alfa Slab One All 12 Walk by Faith designs Walk by Faith in block capitals →