Free Walk by Faith SVG

Walk by Faith in block capitals SVG

Walk by Faith in block capitals, as a solid black shape
Walk by Faith in block capitals. The preview is the SVG file itself.

“WALK BY FAITH” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 75 mm (3.94 × 2.96 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length1,486 mm at this size
Narrowest part3.6 mm at this size
Nodes126 curve and line segments

Measured from the file. PNG: 2,000 × 1,523 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.91 mm377 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.5 in (51 × 38 mm)1.8 mm755 mm35Vinyl, card and thin sheet
3 × 2.26 in (76 × 57 mm)2.7 mm1,132 mm12Vinyl, card and thin sheet
4 × 3.01 in (102 × 76 mm)3.7 mm1,510 mm6Any material, including 3 mm wood and acrylic
6 × 4.51 in (152 × 115 mm)5.5 mm2,265 mm2Any material, including 3 mm wood and acrylic
8 × 6.02 in (203 × 153 mm)7.3 mm3,020 mm1Any material, including 3 mm wood and acrylic
12 × 9.02 in (305 × 229 mm)11 mm4,529 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith in Amatic SC All 12 Walk by Faith designs Walk by Faith in script and capitals →