Free Walk by Faith SVG

Walk by Faith with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Walk by Faith with hearts, as a solid black shape
Walk by Faith with hearts. The preview is the SVG file itself.

“Walk by Faith” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size95 × 100 mm (3.72 × 3.94 in), scales to any size
Pieces13 separate pieces
Outlines to cut17: 13 outer edges and 4 cut-outs
Cut length1,182 mm at this size
Narrowest part1.1 mm at this size
Nodes294 curve and line segments

Measured from the file. PNG: 1,896 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.28 mm300 mm100Too fine for most machines
1.89 × 2 in (48 × 51 mm)0.56 mm600 mm25Fine detail: vinyl and paper only, weed with care
2.84 × 3 in (72 × 76 mm)0.84 mm901 mm12Fine detail: vinyl and paper only, weed with care
3.78 × 4 in (96 × 102 mm)1.1 mm1,201 mm6Vinyl, card and thin sheet
5.68 × 6 in (144 × 152 mm)1.7 mm1,801 mm2Vinyl, card and thin sheet
7.57 × 8 in (192 × 203 mm)2.2 mm2,402 mm1Vinyl, card and thin sheet
11.35 × 12 in (288 × 305 mm)3.4 mm3,603 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith in script and capitals All 13 Walk by Faith designs Walk by Faith outline lettering →