Free Walk by Faith SVG

Walk by Faith outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Walk by Faith outline lettering, drawn as a line
Walk by Faith outline lettering. The preview is the SVG file itself.

“Walk by Faith” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 57 mm (3.94 × 2.24 in), scales to any size
Pieces13 separate pieces
Outlines to cut31: 13 outer edges and 18 cut-outs
Cut length1,441 mm at this size
Narrowest part1.7 mm at this size
Nodes399 curve and line segments

Measured from the file. PNG: 2,000 × 1,173 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.43 mm366 mm150Too fine for most machines
2 × 1.14 in (51 × 29 mm)0.86 mm732 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.71 in (76 × 43 mm)1.3 mm1,098 mm18Vinyl, card and thin sheet
4 × 2.28 in (102 × 58 mm)1.7 mm1,464 mm8Vinyl, card and thin sheet
6 × 3.42 in (152 × 87 mm)2.6 mm2,196 mm3Vinyl, card and thin sheet
8 × 4.56 in (203 × 116 mm)3.5 mm2,928 mm2Any material, including 3 mm wood and acrylic
12 × 6.84 in (305 × 174 mm)5.2 mm4,392 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith with hearts All 13 Walk by Faith designs Walk by Faith stencil plate →