Free Walk by Faith SVG

Walk by Faith in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Walk by Faith in Lilita One, as a solid black shape
Walk by Faith in Lilita One. The preview is the SVG file itself.

“Walk by Faith” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length874 mm at this size
Narrowest part3.2 mm at this size
Nodes215 curve and line segments

Measured from the file. PNG: 2,000 × 1,246 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.81 mm222 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.22 in (51 × 31 mm)1.6 mm444 mm40Vinyl, card and thin sheet
3 × 1.82 in (76 × 46 mm)2.4 mm666 mm18Vinyl, card and thin sheet
4 × 2.43 in (102 × 62 mm)3.3 mm888 mm8Any material, including 3 mm wood and acrylic
6 × 3.65 in (152 × 93 mm)4.9 mm1,332 mm3Any material, including 3 mm wood and acrylic
8 × 4.86 in (203 × 124 mm)6.5 mm1,776 mm2Any material, including 3 mm wood and acrylic
12 × 7.3 in (305 × 185 mm)9.8 mm2,664 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Walk by Faith SVG files

← Walk by Faith in Kaushan Script All 13 Walk by Faith designs Walk by Faith in Alfa Slab One →