Free tool SVG

Tool set in a row SVG

Tool set in a row, as a solid black shape — Tool set in a row. The preview is the SVG file itself.

Five hand tools standing side by side as loose pieces: a hammer, a screwdriver, a wrench, pliers and a saw. Cut the row as a border for a workshop sign or pick out one tool.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.38 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	17: 5 outer edges and 12 cut-outs
Cut length	1,012 mm at this size
Narrowest part	1.5 mm at this size
Nodes	214 curve and line segments

Measured from the file. PNG: 2,000 × 1,240 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 15 mm)	0.38 mm	257 mm	150	Too fine for most machines
2 × 1.21 in (51 × 31 mm)	0.76 mm	514 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.81 in (76 × 46 mm)	1.1 mm	771 mm	18	Vinyl, card and thin sheet
4 × 2.42 in (102 × 61 mm)	1.5 mm	1,028 mm	8	Vinyl, card and thin sheet
6 × 3.63 in (152 × 92 mm)	2.3 mm	1,542 mm	3	Vinyl, card and thin sheet
8 × 4.84 in (203 × 123 mm)	3 mm	2,056 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.26 in (305 × 184 mm)	4.6 mm	3,085 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tool SVG files

← Handyman tools in a fan All 15 tools Tool shadow board →