Free tool SVG

Toolbox outline SVG

Toolbox outline, drawn as a line
Toolbox outline. The preview is the SVG file itself.

The closed toolbox as a line drawing: body, sloping lid, handle and a seam that runs from edge to edge, with two latches hanging from the seam. For colouring sheets and engraving.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 88 mm (3.94 × 3.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length1,009 mm at this size
Narrowest part2.1 mm at this size
Nodes74 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,765 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)0.53 mm256 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.76 in (51 × 45 mm)1.1 mm513 mm30Vinyl, card and thin sheet
3 × 2.63 in (76 × 67 mm)1.6 mm769 mm12Vinyl, card and thin sheet
4 × 3.51 in (102 × 89 mm)2.1 mm1,025 mm6Vinyl, card and thin sheet
6 × 5.27 in (152 × 134 mm)3.2 mm1,538 mm2Any material, including 3 mm wood and acrylic
8 × 7.02 in (203 × 178 mm)4.3 mm2,050 mm1Any material, including 3 mm wood and acrylic
12 × 10.54 in (305 × 268 mm)6.4 mm3,075 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tool SVG files

← Tool monogram frame All 15 tools Layered tape measure tool in three colours →