Closed tool box with a handle SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A steel toolbox shut for the journey home: a deep body, a sloping lid with a carrying handle, a seam, two latches and a line near the foot. The lid and the front are blank for a name.
What is in the file
| Size | 100 × 88 mm (3.94 × 3.46 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 869 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 94 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,765 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.88 in (25 × 22 mm) | 0.71 mm | 221 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.76 in (51 × 45 mm) | 1.4 mm | 441 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.63 in (76 × 67 mm) | 2.1 mm | 662 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.51 in (102 × 89 mm) | 2.8 mm | 883 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.27 in (152 × 134 mm) | 4.3 mm | 1,324 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.02 in (203 × 178 mm) | 5.7 mm | 1,766 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.54 in (305 × 268 mm) | 8.5 mm | 2,649 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.