Free tool SVG

Pliers tool SVG

Pliers tool, as a solid black shape — Pliers tool. The preview is the SVG file itself.

A pair of pliers standing a little open: two flat jaws above a round pivot with its pin, and two long curved grips below. One piece with a single small hole.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	68 × 100 mm (2.67 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	349 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	40 curve and line segments

Measured from the file. PNG: 1,383 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.68 × 1 in (17 × 25 mm)	Over 1.5 mm	89 mm	130	Vinyl, card and thin sheet
1.36 × 2 in (34 × 51 mm)	Over 3 mm	177 mm	35	Any material, including 3 mm wood and acrylic
2.04 × 3 in (52 × 76 mm)	Over 4.6 mm	266 mm	15	Any material, including 3 mm wood and acrylic
2.72 × 4 in (69 × 102 mm)	Over 6.1 mm	355 mm	8	Any material, including 3 mm wood and acrylic
4.07 × 6 in (103 × 152 mm)	Over 9.1 mm	532 mm	2	Any material, including 3 mm wood and acrylic
5.43 × 8 in (138 × 203 mm)	Over 12 mm	709 mm	2	Any material, including 3 mm wood and acrylic
8.15 × 12 in (207 × 305 mm)	Over 18 mm	1,064 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tool SVG files

← Tape measure tool All 15 tools Circular saw blade tool →