Free tool SVG

Handyman tools in a fan SVG

Handyman tools in a fan, as a solid black shape — Handyman tools in a fan. The preview is the SVG file itself.

A hammer standing between a screwdriver and a wrench, the three fanned out from their handles. The hammer lies in front, with a thin gap where it crosses the other two.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 91 mm (3.94 × 3.57 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	871 mm at this size
Narrowest part	1.8 mm at this size
Nodes	108 curve and line segments

Measured from the file. PNG: 2,000 × 1,823 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.46 mm	221 mm	110	Too fine for most machines
2 × 1.82 in (51 × 46 mm)	0.91 mm	442 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.72 in (76 × 69 mm)	1.4 mm	664 mm	12	Vinyl, card and thin sheet
4 × 3.63 in (102 × 92 mm)	1.8 mm	885 mm	6	Vinyl, card and thin sheet
6 × 5.45 in (152 × 138 mm)	2.7 mm	1,327 mm	2	Vinyl, card and thin sheet
8 × 7.26 in (203 × 185 mm)	3.7 mm	1,770 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.9 in (305 × 277 mm)	5.5 mm	2,655 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tool SVG files

← Circular saw blade tool All 15 tools Tool set in a row →