Tool shadow board SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A workshop board with the shapes of a hammer, a wrench and a screwdriver cut out of it and rows of peg holes round them. The tools are open, so the wall colour shows through.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.7 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 51: 1 outer edge and 50 cut-outs |
| Cut length | 1,444 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 225 curve and line segments |
| Also found as | Pegboard SVG |
Measured from the file. PNG: 2,000 × 1,883 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | 0.48 mm | 367 mm | 100 | Too fine for most machines |
| 2 × 1.88 in (51 × 48 mm) | 0.97 mm | 734 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.82 in (76 × 72 mm) | 1.4 mm | 1,100 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.76 in (102 × 95 mm) | 1.9 mm | 1,467 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.63 in (152 × 143 mm) | 2.9 mm | 2,201 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.51 in (203 × 191 mm) | 3.9 mm | 2,934 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.27 in (305 × 286 mm) | 5.8 mm | 4,401 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More tool SVG files
-
Woodworking plane tool Solid · one piece
-
Tool monogram frame Solid · one piece
-
Toolbox outline Outline · one piece
-
Layered tape measure tool in three colours Layered · 4 pieces
-
Toolbox full of tools Solid · one piece
-
Closed tool box with a handle Solid · one piece
-
Hand saw tool Solid · one piece
-
Screwdriver tools crossed Solid · one piece