Screwdriver tools crossed SVG
Two screwdrivers crossed with their tips up, one flat and one cross-head, each with a fluted handle. A short gap either side of the front blade shows where they cross.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 73 × 100 mm (2.88 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 737 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 78 curve and line segments |
Measured from the file. PNG: 1,485 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.73 × 1 in (19 × 25 mm) | 0.51 mm | 187 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.46 × 2 in (37 × 51 mm) | 1 mm | 374 mm | 35 | Vinyl, card and thin sheet |
| 2.2 × 3 in (56 × 76 mm) | 1.5 mm | 562 mm | 15 | Vinyl, card and thin sheet |
| 2.93 × 4 in (74 × 102 mm) | 2 mm | 749 mm | 6 | Vinyl, card and thin sheet |
| 4.39 × 6 in (112 × 152 mm) | 3 mm | 1,123 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.86 × 8 in (149 × 203 mm) | 4.1 mm | 1,498 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.78 × 12 in (223 × 305 mm) | 6.1 mm | 2,246 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Cordless drill tool 
Tape measure tool 
Pliers tool 
Circular saw blade tool 
Handyman tools in a fan 
Tool set in a row 
Tool shadow board 
Woodworking plane tool 