Thankful and Blessed with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Thankful and Blessed” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 53 mm (3.94 × 2.09 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 23: 7 outer edges and 16 cut-outs |
| Cut length | 1,757 mm at this size |
| Narrowest part | 4.1 mm at this size |
| Nodes | 602 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,098 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.53 in (25 × 13 mm) | 1 mm | 446 mm | 160 | Vinyl, card and thin sheet |
| 2 × 1.06 in (51 × 27 mm) | 2.1 mm | 893 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.59 in (76 × 40 mm) | 3.1 mm | 1,339 mm | 18 | Any material, including 3 mm wood and acrylic |
| 4 × 2.12 in (102 × 54 mm) | 4.2 mm | 1,785 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.19 in (152 × 81 mm) | 6.2 mm | 2,678 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.25 in (203 × 108 mm) | 8.3 mm | 3,570 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.37 in (305 × 162 mm) | 12 mm | 5,355 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful and Blessed SVG files
-
Thankful and Blessed with three ears of wheat Solid · 12 pieces
-
Thankful and Blessed in Pacifico Solid · 4 pieces
-
Thankful and Blessed in Lobster Solid · 5 pieces
-
Thankful and Blessed in Kaushan Script Solid · 18 pieces
-
Thankful and Blessed in Lilita One Solid · 18 pieces
-
Thankful and Blessed in Alfa Slab One Solid · 17 pieces
-
Thankful and Blessed in Amatic SC Solid · 18 pieces
-
Thankful and Blessed in block capitals Solid · 18 pieces
← Thankful and Blessed stencil plate All 13 Thankful and Blessed designs Thankful and Blessed with three ears of wheat →