Free Thankful and Blessed SVG

Thankful and Blessed in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Thankful and Blessed in Alfa Slab One, as a solid black shape
Thankful and Blessed in Alfa Slab One. The preview is the SVG file itself.

“Thankful and Blessed” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 32 mm (3.94 × 1.27 in), scales to any size
Pieces17 separate pieces
Outlines to cut25: 17 outer edges and 8 cut-outs
Cut length918 mm at this size
Narrowest part1.3 mm at this size
Nodes361 curve and line segments

Measured from the file. PNG: 2,000 × 696 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.33 mm233 mm230Too fine for most machines
2 × 0.64 in (51 × 16 mm)0.66 mm466 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.97 in (76 × 25 mm)0.99 mm700 mm30Fine detail: vinyl and paper only, weed with care
4 × 1.29 in (102 × 33 mm)1.3 mm933 mm16Vinyl, card and thin sheet
6 × 1.93 in (152 × 49 mm)2 mm1,399 mm5Vinyl, card and thin sheet
8 × 2.58 in (203 × 65 mm)2.6 mm1,865 mm4Vinyl, card and thin sheet
12 × 3.86 in (305 × 98 mm)4 mm2,798 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thankful and Blessed SVG files

← Thankful and Blessed in Lilita One All 13 Thankful and Blessed designs Thankful and Blessed in Amatic SC →