Thankful and Blessed in block capitals SVG
“THANKFUL AND BLESSED” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 47 mm (3.94 × 1.85 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 24: 18 outer edges and 6 cut-outs |
| Cut length | 1,461 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 227 curve and line segments |
Measured from the file. PNG: 2,000 × 983 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.47 in (25 × 12 mm) | 0.58 mm | 371 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.94 in (51 × 24 mm) | 1.2 mm | 742 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.41 in (76 × 36 mm) | 1.8 mm | 1,113 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.88 in (102 × 48 mm) | 2.3 mm | 1,484 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.83 in (152 × 72 mm) | 3.5 mm | 2,227 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.77 in (203 × 96 mm) | 4.7 mm | 2,969 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.65 in (305 × 144 mm) | 7 mm | 4,453 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful and Blessed SVG files
-
Thankful and Blessed in script and capitals Solid · 11 pieces -
Thankful and Blessed with hearts Solid · 11 pieces -
Thankful and Blessed outline lettering Outline · 20 pieces -
Thankful and Blessed stencil plate Solid · one piece -
Thankful and Blessed with a drop shadow Layered · 7 pieces -
Thankful and Blessed in Pacifico Solid · 4 pieces -
Thankful and Blessed in Lobster Solid · 5 pieces -
Thankful and Blessed in Kaushan Script Solid · 18 pieces
← Thankful and Blessed in Amatic SC All 12 Thankful and Blessed designs Thankful and Blessed in script and capitals →