Free Thankful and Blessed SVG

Thankful and Blessed in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Thankful and Blessed in Lobster, as a solid black shape
Thankful and Blessed in Lobster. The preview is the SVG file itself.

“Thankful and Blessed” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 46 mm (3.94 × 1.8 in), scales to any size
Pieces5 separate pieces
Outlines to cut15: 5 outer edges and 10 cut-outs
Cut length1,053 mm at this size
Narrowest part0.7 mm at this size
Nodes374 curve and line segments

Measured from the file. PNG: 2,000 × 956 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.18 mm267 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.36 mm535 mm50Too fine for most machines
3 × 1.37 in (76 × 35 mm)0.53 mm802 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.83 in (102 × 46 mm)0.71 mm1,070 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.74 in (152 × 70 mm)1.1 mm1,605 mm4Vinyl, card and thin sheet
8 × 3.66 in (203 × 93 mm)1.4 mm2,140 mm3Vinyl, card and thin sheet
12 × 5.48 in (305 × 139 mm)2.1 mm3,210 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Thankful and Blessed SVG files

← Thankful and Blessed in Pacifico All 13 Thankful and Blessed designs Thankful and Blessed in Kaushan Script →