Thankful and Blessed in Lilita One SVG
“Thankful and Blessed” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.4 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 26: 18 outer edges and 8 cut-outs |
| Cut length | 853 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 382 curve and line segments |
Measured from the file. PNG: 2,000 × 760 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | 0.61 mm | 217 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.71 in (51 × 18 mm) | 1.2 mm | 433 mm | 65 | Vinyl, card and thin sheet |
| 3 × 1.07 in (76 × 27 mm) | 1.8 mm | 650 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.42 in (102 × 36 mm) | 2.4 mm | 867 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.13 in (152 × 54 mm) | 3.7 mm | 1,300 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.84 in (203 × 72 mm) | 4.9 mm | 1,733 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 4.26 in (305 × 108 mm) | 7.3 mm | 2,600 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful and Blessed SVG files
-
Thankful and Blessed in Alfa Slab One Solid · 17 pieces -
Thankful and Blessed in Amatic SC Solid · 18 pieces -
Thankful and Blessed in block capitals Solid · 18 pieces -
Thankful and Blessed in script and capitals Solid · 11 pieces -
Thankful and Blessed with hearts Solid · 11 pieces -
Thankful and Blessed outline lettering Outline · 20 pieces -
Thankful and Blessed stencil plate Solid · one piece -
Thankful and Blessed with a drop shadow Layered · 7 pieces
← Thankful and Blessed in Kaushan Script All 12 Thankful and Blessed designs Thankful and Blessed in Alfa Slab One →