Thankful and Blessed stencil plate SVG
A rounded plate with “THANKFUL AND BLESSED” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 51 mm (3.94 × 2 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 1,239 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 365 curve and line segments |
Measured from the file. PNG: 2,000 × 1,056 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.51 in (25 × 13 mm) | 0.33 mm | 315 mm | 170 | Too fine for most machines |
| 2 × 1.02 in (51 × 26 mm) | 0.66 mm | 629 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.53 in (76 × 39 mm) | 0.99 mm | 944 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.04 in (102 × 52 mm) | 1.3 mm | 1,259 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.05 in (152 × 78 mm) | 2 mm | 1,888 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.07 in (203 × 103 mm) | 2.6 mm | 2,518 mm | 2 | Vinyl, card and thin sheet |
| 12 × 6.11 in (305 × 155 mm) | 4 mm | 3,776 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful and Blessed SVG files
-
Thankful and Blessed with a drop shadow Layered · 7 pieces -
Thankful and Blessed in Pacifico Solid · 4 pieces -
Thankful and Blessed in Lobster Solid · 5 pieces -
Thankful and Blessed in Kaushan Script Solid · 18 pieces -
Thankful and Blessed in Lilita One Solid · 18 pieces -
Thankful and Blessed in Alfa Slab One Solid · 17 pieces -
Thankful and Blessed in Amatic SC Solid · 18 pieces -
Thankful and Blessed in block capitals Solid · 18 pieces
← Thankful and Blessed outline lettering All 12 Thankful and Blessed designs Thankful and Blessed with a drop shadow →