Thankful and Blessed in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Thankful and Blessed” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.33 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 24: 18 outer edges and 6 cut-outs |
| Cut length | 1,470 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 534 curve and line segments |
Measured from the file. PNG: 2,000 × 1,217 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.25 mm | 373 mm | 150 | Too fine for most machines |
| 2 × 1.19 in (51 × 30 mm) | 0.51 mm | 747 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.78 in (76 × 45 mm) | 0.76 mm | 1,120 mm | 18 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.37 in (102 × 60 mm) | 1 mm | 1,494 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.56 in (152 × 90 mm) | 1.5 mm | 2,240 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.74 in (203 × 120 mm) | 2 mm | 2,987 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.12 in (305 × 181 mm) | 3 mm | 4,481 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Thankful and Blessed SVG files
-
Thankful and Blessed in block capitals Solid · 18 pieces
-
Thankful and Blessed in script and capitals Solid · 11 pieces
-
Thankful and Blessed with hearts Solid · 11 pieces
-
Thankful and Blessed outline lettering Outline · 20 pieces
-
Thankful and Blessed stencil plate Solid · one piece
-
Thankful and Blessed with a drop shadow Layered · 7 pieces
-
Thankful and Blessed with three ears of wheat Solid · 12 pieces
-
Thankful and Blessed in Pacifico Solid · 4 pieces
← Thankful and Blessed in Alfa Slab One All 13 Thankful and Blessed designs Thankful and Blessed in block capitals →