Free tea SVG

Tea party stack of teapot and cups SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tea party stack of teapot and cups, as a solid black shape
Tea party stack of teapot and cups. The preview is the SVG file itself.

A wobbling tower for a tea party: a teapot at the bottom, a cup with a heart tipped one way on its lid, a smaller spotted cup tipped the other way on top, and a wisp of steam. One piece.

What is in the file

Size74 × 100 mm (2.92 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length810 mm at this size
Narrowest part1 mm at this size
Nodes190 curve and line segments

Measured from the file. PNG: 1,502 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.74 × 1 in (19 × 25 mm)0.25 mm206 mm120Too fine for most machines
1.48 × 2 in (38 × 51 mm)0.51 mm411 mm35Fine detail: vinyl and paper only, weed with care
2.22 × 3 in (56 × 76 mm)0.76 mm617 mm15Fine detail: vinyl and paper only, weed with care
2.96 × 4 in (75 × 102 mm)1 mm823 mm6Vinyl, card and thin sheet
4.45 × 6 in (113 × 152 mm)1.5 mm1,234 mm2Vinyl, card and thin sheet
5.93 × 8 in (151 × 203 mm)2 mm1,646 mm1Vinyl, card and thin sheet
8.89 × 12 in (226 × 305 mm)3 mm2,469 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Teapot outline All 17 tea designs Teapot pouring tea into a cup →