Free tea SVG

Teapot pouring tea into a cup SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Teapot pouring tea into a cup, as a solid black shape
Teapot pouring tea into a cup. The preview is the SVG file itself.

A teapot tipped forward with a stream of tea running from its spout down into a cup on a saucer. The stream welds pot and cup together, so the whole scene lifts as one piece.

What is in the file

Size100 × 99 mm (3.94 × 3.9 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length770 mm at this size
Narrowest part1.8 mm at this size
Nodes126 curve and line segments

Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.46 mm196 mm100Too fine for most machines
2 × 1.98 in (51 × 50 mm)0.91 mm391 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.97 in (76 × 75 mm)1.4 mm587 mm9Vinyl, card and thin sheet
4 × 3.96 in (102 × 101 mm)1.8 mm782 mm4Vinyl, card and thin sheet
6 × 5.94 in (152 × 151 mm)2.7 mm1,173 mm1Vinyl, card and thin sheet
8 × 7.92 in (203 × 201 mm)3.7 mm1,565 mm1Any material, including 3 mm wood and acrylic
12 × 11.88 in (305 × 302 mm)5.5 mm2,347 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Tea party stack of teapot and cups All 17 tea designs Mug of tea with heart steam →