Free tea SVG

Stack of three teacups SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Stack of three teacups, as a solid black shape
Stack of three teacups. The preview is the SVG file itself.

Three teacups stacked one inside the next, each leaning a little and turning its handle the other way, on a single saucer. A tall narrow design for the edge of a card or a kitchen cupboard door.

What is in the file

Size72 × 100 mm (2.81 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,123 mm at this size
Narrowest part1.1 mm at this size
Nodes148 curve and line segments

Measured from the file. PNG: 1,452 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.28 mm285 mm130Too fine for most machines
1.43 × 2 in (36 × 51 mm)0.56 mm570 mm35Fine detail: vinyl and paper only, weed with care
2.14 × 3 in (54 × 76 mm)0.84 mm856 mm15Fine detail: vinyl and paper only, weed with care
2.86 × 4 in (73 × 102 mm)1.1 mm1,141 mm6Vinyl, card and thin sheet
4.29 × 6 in (109 × 152 mm)1.7 mm1,711 mm2Vinyl, card and thin sheet
5.72 × 8 in (145 × 203 mm)2.2 mm2,282 mm2Vinyl, card and thin sheet
8.58 × 12 in (218 × 305 mm)3.4 mm3,423 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Boba tea cup with pearls All 17 tea designs Tea leaves on a sprig →