Free tea SVG

Tea leaves on a sprig SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tea leaves on a sprig, as a solid black shape
Tea leaves on a sprig. The preview is the SVG file itself.

The tip of a tea shoot, the part that is picked: two open leaves with their veins cut in and a rolled bud between them, on a short stem. A plain mark for tea tins, jar labels and menu boards.

What is in the file

Size89 × 100 mm (3.52 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length794 mm at this size
Narrowest part1.6 mm at this size
Nodes88 curve and line segments

Measured from the file. PNG: 1,796 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.41 mm202 mm110Too fine for most machines
1.79 × 2 in (45 × 51 mm)0.81 mm403 mm30Fine detail: vinyl and paper only, weed with care
2.68 × 3 in (68 × 76 mm)1.2 mm605 mm12Vinyl, card and thin sheet
3.58 × 4 in (91 × 102 mm)1.6 mm807 mm6Vinyl, card and thin sheet
5.36 × 6 in (136 × 152 mm)2.4 mm1,210 mm2Vinyl, card and thin sheet
7.15 × 8 in (182 × 203 mm)3.3 mm1,613 mm1Any material, including 3 mm wood and acrylic
10.73 × 12 in (272 × 305 mm)4.9 mm2,420 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Stack of three teacups All 17 tea designs Layered teapot in four colours →