Free tea SVG

Boba tea cup with pearls SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boba tea cup with pearls, as a solid black shape
Boba tea cup with pearls. The preview is the SVG file itself.

A cup of bubble tea with a domed lid and a fat straw: eleven tapioca pearls cut as round holes at the bottom, a wavy line for the tea and a heart on the front.

What is in the file

Size46 × 100 mm (1.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length553 mm at this size
Narrowest part1.2 mm at this size
Nodes175 curve and line segments

Measured from the file. PNG: 954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.46 × 1 in (12 × 25 mm)0.3 mm140 mm180Too fine for most machines
0.91 × 2 in (23 × 51 mm)0.61 mm281 mm50Fine detail: vinyl and paper only, weed with care
1.37 × 3 in (35 × 76 mm)0.91 mm421 mm21Fine detail: vinyl and paper only, weed with care
1.82 × 4 in (46 × 102 mm)1.2 mm562 mm12Vinyl, card and thin sheet
2.74 × 6 in (69 × 152 mm)1.8 mm843 mm4Vinyl, card and thin sheet
3.65 × 8 in (93 × 203 mm)2.4 mm1,124 mm3Vinyl, card and thin sheet
5.47 × 12 in (139 × 305 mm)3.7 mm1,686 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Tea pot filled with flowers All 17 tea designs Stack of three teacups →