Free tea SVG

Teapot outline SVG

Teapot outline, drawn as a line — Teapot outline. The preview is the SVG file itself.

The round teapot as an even line: the belly, the foot, the lid with its knob, the spout and a handle drawn as a single loop. For colouring pages, foil and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 72 mm (3.94 × 2.82 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	768 mm at this size
Narrowest part	1.7 mm at this size
Nodes	106 curve and line segments

Measured from the file. PNG: 2,000 × 1,456 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.72 in (25 × 18 mm)	0.43 mm	195 mm	130	Too fine for most machines
2 × 1.43 in (51 × 36 mm)	0.86 mm	390 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.15 in (76 × 55 mm)	1.3 mm	585 mm	15	Vinyl, card and thin sheet
4 × 2.87 in (102 × 73 mm)	1.7 mm	780 mm	6	Vinyl, card and thin sheet
6 × 4.3 in (152 × 109 mm)	2.6 mm	1,170 mm	2	Vinyl, card and thin sheet
8 × 5.74 in (203 × 146 mm)	3.5 mm	1,561 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.6 in (305 × 219 mm)	5.2 mm	2,341 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More tea SVG files

← Teapot and tea cup silhouette All 17 tea designs Tea party stack of teapot and cups →