Standing skeleton SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A whole skeleton from the front, arms a little out from its sides: skull, collarbones, five pairs of ribs, spine, pelvis and limb bones with knuckled ends, welded at every joint into one piece.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 50 × 100 mm (1.98 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 860 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 301 curve and line segments |
| Also found as | Simple skeleton SVG |
Measured from the file. PNG: 1,046 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.5 × 1 in (13 × 25 mm) | 0.3 mm | 218 mm | 170 | Too fine for most machines |
| 1.01 × 2 in (26 × 51 mm) | 0.61 mm | 437 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 1.51 × 3 in (38 × 76 mm) | 0.91 mm | 655 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 2.02 × 4 in (51 × 102 mm) | 1.2 mm | 874 mm | 10 | Vinyl, card and thin sheet |
| 3.02 × 6 in (77 × 152 mm) | 1.8 mm | 1,311 mm | 3 | Vinyl, card and thin sheet |
| 4.03 × 8 in (102 × 203 mm) | 2.4 mm | 1,748 mm | 2 | Vinyl, card and thin sheet |
| 6.05 × 12 in (154 × 305 mm) | 3.7 mm | 2,621 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skeleton SVG files
-
Dancing skeleton Solid · one piece
-
Waving skeleton Solid · one piece
-
Dabbing skeleton Solid · one piece
-
Skeleton couple holding hands Solid · one piece
-
Baby skeleton Solid · one piece
-
Skeleton head and shoulders Solid · one piece
-
Skeleton hand Solid · one piece
-
Pair of skeleton hands Solid · 2 pieces
← Crossed skeleton bones All 16 skeletons Dancing skeleton →