Free skeleton SVG

Dancing skeleton SVG

Dancing skeleton, as a solid black shape — Dancing skeleton. The preview is the SVG file itself.

A skeleton mid-step with one arm thrown up, the other elbow cocked, one knee kicked out and its head tipped to the side. Cut a row of them for a party banner.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.8 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	862 mm at this size
Narrowest part	2.3 mm at this size
Nodes	285 curve and line segments

Measured from the file. PNG: 1,442 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.58 mm	219 mm	130	Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)	1.2 mm	438 mm	35	Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)	1.8 mm	657 mm	15	Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)	2.3 mm	876 mm	8	Vinyl, card and thin sheet
4.26 × 6 in (108 × 152 mm)	3.5 mm	1,314 mm	2	Any material, including 3 mm wood and acrylic
5.68 × 8 in (144 × 203 mm)	4.7 mm	1,752 mm	2	Any material, including 3 mm wood and acrylic
8.52 × 12 in (216 × 305 mm)	7 mm	2,627 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Standing skeleton All 16 skeletons Waving skeleton →