Free skeleton SVG

Skeleton couple holding hands SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Skeleton couple holding hands, as a solid black shape
Skeleton couple holding hands. The preview is the SVG file itself.

Two skeletons side by side with their inner hands joined, one in a top hat and one with a bow on her head. They cut as a single piece for cards, anniversaries and wedding signs.

What is in the file

Size100 × 99 mm (3.94 × 3.91 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length1,574 mm at this size
Narrowest part1 mm at this size
Nodes583 curve and line segments

Measured from the file. PNG: 2,000 × 1,985 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.25 mm400 mm100Too fine for most machines
2 × 1.98 in (51 × 50 mm)0.51 mm800 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.98 in (76 × 76 mm)0.76 mm1,199 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.97 in (102 × 101 mm)1 mm1,599 mm4Vinyl, card and thin sheet
6 × 5.95 in (152 × 151 mm)1.5 mm2,399 mm1Vinyl, card and thin sheet
8 × 7.94 in (203 × 202 mm)2 mm3,198 mm1Vinyl, card and thin sheet
12 × 11.9 in (305 × 302 mm)3 mm4,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Dabbing skeleton All 16 skeletons Baby skeleton →