Free skeleton SVG

Skeleton arm SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Skeleton arm, as a solid black shape
Skeleton arm. The preview is the SVG file itself.

A whole arm reaching up on the diagonal: the upper arm bone with its round head, a slight bend at the elbow, the two bones of the forearm and an open hand. Reach it round the edge of a door, a mirror or a mug.

What is in the file

Size98 × 100 mm (3.85 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length608 mm at this size
Narrowest part1.9 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 1,956 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.48 mm154 mm100Too fine for most machines
1.95 × 2 in (50 × 51 mm)0.97 mm309 mm25Fine detail: vinyl and paper only, weed with care
2.93 × 3 in (74 × 76 mm)1.4 mm463 mm9Vinyl, card and thin sheet
3.91 × 4 in (99 × 102 mm)1.9 mm618 mm4Vinyl, card and thin sheet
5.86 × 6 in (149 × 152 mm)2.9 mm927 mm2Vinyl, card and thin sheet
7.82 × 8 in (199 × 203 mm)3.9 mm1,235 mm1Any material, including 3 mm wood and acrylic
11.72 × 12 in (298 × 305 mm)5.8 mm1,853 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Skeleton hand rock sign All 16 skeletons Skeleton hands making a heart →