Free skeleton SVG

Single skeleton bone SVG

Single skeleton bone, as a solid black shape — Single skeleton bone. The preview is the SVG file itself.

One long bone with a waisted shaft and two knuckles at each end, set on the diagonal. Scatter a few, or cross two under a name.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	282 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	51 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	Over 1.5 mm	72 mm	120	Vinyl, card and thin sheet
2 × 1.52 in (51 × 39 mm)	Over 3 mm	143 mm	35	Any material, including 3 mm wood and acrylic
3 × 2.28 in (76 × 58 mm)	Over 4.6 mm	215 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.04 in (102 × 77 mm)	Over 6.1 mm	287 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.56 in (152 × 116 mm)	Over 9.1 mm	430 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.08 in (203 × 154 mm)	Over 12 mm	573 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.12 in (305 × 232 mm)	Over 18 mm	860 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Skeleton rib cage All 16 skeletons Crossed skeleton bones →