Free skeleton SVG

Waving skeleton SVG

Waving skeleton, as a solid black shape — Waving skeleton. The preview is the SVG file itself.

A friendly skeleton standing square with one hand raised in a wave and its head tilted. For welcome signs, treat bags and classroom doors.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	53 × 100 mm (2.09 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	863 mm at this size
Narrowest part	2.3 mm at this size
Nodes	278 curve and line segments

Measured from the file. PNG: 1,096 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.53 × 1 in (13 × 25 mm)	0.58 mm	219 mm	160	Fine detail: vinyl and paper only, weed with care
1.06 × 2 in (27 × 51 mm)	1.2 mm	438 mm	45	Vinyl, card and thin sheet
1.59 × 3 in (40 × 76 mm)	1.8 mm	658 mm	18	Vinyl, card and thin sheet
2.12 × 4 in (54 × 102 mm)	2.3 mm	877 mm	10	Vinyl, card and thin sheet
3.18 × 6 in (81 × 152 mm)	3.5 mm	1,315 mm	3	Any material, including 3 mm wood and acrylic
4.24 × 8 in (108 × 203 mm)	4.7 mm	1,754 mm	2	Any material, including 3 mm wood and acrylic
6.36 × 12 in (162 × 305 mm)	7 mm	2,630 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Dancing skeleton All 16 skeletons Dabbing skeleton →