Free skeleton SVG

Dabbing skeleton SVG

Dabbing skeleton, as a solid black shape — Dabbing skeleton. The preview is the SVG file itself.

A skeleton doing the dab: one arm flung straight out and up, the other folded across its bowed face. A thin gap parts the forearm from the skull, and one eye shows above it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	64 × 100 mm (2.5 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	785 mm at this size
Narrowest part	2.4 mm at this size
Nodes	259 curve and line segments

Measured from the file. PNG: 1,300 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.64 × 1 in (16 × 25 mm)	0.61 mm	199 mm	140	Fine detail: vinyl and paper only, weed with care
1.27 × 2 in (32 × 51 mm)	1.2 mm	399 mm	40	Vinyl, card and thin sheet
1.91 × 3 in (48 × 76 mm)	1.8 mm	598 mm	15	Vinyl, card and thin sheet
2.54 × 4 in (65 × 102 mm)	2.4 mm	798 mm	8	Vinyl, card and thin sheet
3.82 × 6 in (97 × 152 mm)	3.7 mm	1,196 mm	3	Any material, including 3 mm wood and acrylic
5.09 × 8 in (129 × 203 mm)	4.9 mm	1,595 mm	2	Any material, including 3 mm wood and acrylic
7.63 × 12 in (194 × 305 mm)	7.3 mm	2,393 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Waving skeleton All 16 skeletons Skeleton couple holding hands →