Free skeleton SVG

Pair of skeleton hands SVG

Pair of skeleton hands, as a solid black shape — Pair of skeleton hands. The preview is the SVG file itself.

A left and a right hand reaching up, tilted apart, as two loose pieces. Put one each side of a name, a mug or a pocket.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 59 mm (3.94 × 2.3 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	822 mm at this size
Narrowest part	2 mm at this size
Nodes	336 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,202 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.59 in (25 × 15 mm)	0.51 mm	209 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.17 in (51 × 30 mm)	1 mm	418 mm	40	Vinyl, card and thin sheet
3 × 1.75 in (76 × 45 mm)	1.5 mm	626 mm	18	Vinyl, card and thin sheet
4 × 2.34 in (102 × 59 mm)	2 mm	835 mm	8	Vinyl, card and thin sheet
6 × 3.51 in (152 × 89 mm)	3 mm	1,253 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.68 in (203 × 119 mm)	4.1 mm	1,670 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.02 in (305 × 178 mm)	6.1 mm	2,505 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Skeleton hand All 16 skeletons Skeleton hand peace sign →