Free skeleton SVG

Crossed skeleton bones SVG

Crossed skeleton bones, as a solid black shape — Crossed skeleton bones. The preview is the SVG file itself.

Two long bones crossed in an X and welded where they meet. Put them behind a monogram, a cup or a pet’s name.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 90 mm (3.94 × 3.52 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	550 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	127 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	Over 1.5 mm	140 mm	110	Vinyl, card and thin sheet
2 × 1.79 in (51 × 45 mm)	Over 3 mm	279 mm	30	Any material, including 3 mm wood and acrylic
3 × 2.69 in (76 × 68 mm)	Over 4.6 mm	419 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.58 in (102 × 91 mm)	Over 6.1 mm	559 mm	6	Any material, including 3 mm wood and acrylic
6 × 5.37 in (152 × 136 mm)	Over 9.1 mm	838 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.16 in (203 × 182 mm)	Over 12 mm	1,118 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.74 in (305 × 273 mm)	Over 18 mm	1,676 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skeleton SVG files

← Single skeleton bone All 16 skeletons Standing skeleton →