Free shield SVG

Blank family crest with crown and laurels SVG

Blank family crest with crown and laurels. The preview is the SVG file itself.

A double-lined shield under a small crown, with a laurel branch curving up each side from its point. Add an initial or a device of your own in the middle.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	1,222 mm at this size
Narrowest part	2.2 mm at this size
Nodes	211 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.56 mm	310 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.1 mm	621 mm	25	Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)	1.7 mm	931 mm	9	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	2.2 mm	1,242 mm	6	Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)	3.4 mm	1,862 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)	4.5 mm	2,483 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)	6.7 mm	3,725 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Shield with crossed swords All 15 shields Blank badge with a star →