Free shield SVG

Badge outline with a double line SVG

Badge outline with a double line. The preview is the SVG file itself.

The same badge shape as a bold line with a fine line inside, and nothing in the middle. A blank to fill with a name, a role or a club mark.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	77 × 100 mm (3.05 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	1,083 mm at this size
Narrowest part	2.2 mm at this size
Nodes	124 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,565 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.77 × 1 in (20 × 25 mm)	0.56 mm	275 mm	120	Fine detail: vinyl and paper only, weed with care
1.55 × 2 in (39 × 51 mm)	1.1 mm	550 mm	30	Vinyl, card and thin sheet
2.32 × 3 in (59 × 76 mm)	1.7 mm	825 mm	12	Vinyl, card and thin sheet
3.1 × 4 in (79 × 102 mm)	2.2 mm	1,100 mm	6	Vinyl, card and thin sheet
4.64 × 6 in (118 × 152 mm)	3.4 mm	1,650 mm	2	Any material, including 3 mm wood and acrylic
6.19 × 8 in (157 × 203 mm)	4.5 mm	2,201 mm	1	Any material, including 3 mm wood and acrylic
9.29 × 12 in (236 × 305 mm)	6.7 mm	3,301 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Blank badge with a star All 15 shields Seven-point star badge →