Free shield SVG

Shield outline SVG

Shield outline, drawn as a line
Shield outline. The preview is the SVG file itself.

The heater shield as a single line just over 3 mm wide. A frame for a monogram, a team name or a house number, or a layer over the solid shield.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size80 × 100 mm (3.17 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length602 mm at this size
Narrowest part3.4 mm at this size
Nodes14 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,623 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.86 mm153 mm120Fine detail: vinyl and paper only, weed with care
1.61 × 2 in (41 × 51 mm)1.7 mm306 mm30Vinyl, card and thin sheet
2.41 × 3 in (61 × 76 mm)2.6 mm459 mm12Vinyl, card and thin sheet
3.22 × 4 in (82 × 102 mm)3.5 mm612 mm6Any material, including 3 mm wood and acrylic
4.82 × 6 in (123 × 152 mm)5.2 mm917 mm2Any material, including 3 mm wood and acrylic
6.43 × 8 in (163 × 203 mm)6.9 mm1,223 mm1Any material, including 3 mm wood and acrylic
9.65 × 12 in (245 × 305 mm)10 mm1,835 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shield SVG files

← Heater shield All 15 shields French shield with a double line →